Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
- 3. Greasing system
   3.1. Removal and installation oil картера the engine
   3.2. Repair of the oil pump on engines of 1,0 l, 37 kw and 1,4 l, 50 kw
   3.3. Replacement of the oil pump
   3.4. The oil filter of the diesel engine
   3.5. Check of level of oil in картере the engine
   3.6. Replacement of oil and the oil filter
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




3.6. Replacement of oil and the oil filter
THE GENERAL DATA

Oil merge after a trip, the engine has not cooled down yet. If the engine cold, start up and warm up it to working temperature.

PETROL ENGINES

Refuelling volumes of system of greasing with the oil filter, l

Engines of 1,0 l 37, kw and 1,4 l, 50 kw
4,4
Engines of 1,4 l, 55 kw and 74 kw
3,2

Fill in in system the oils corresponding to norms VW 500 00, VW 501 01 and VW 502 00.

PERFORMANCE ORDER
1. Establish the car on a horizontal equal platform.
2. Start up the engine and warm up it to working temperature. Stop the engine and wait some minutes that oil has flown down in the pallet картера.
3. Remove a stopper 1 (fig. of the Detail of system of greasing of the engine of 1,0 l, 37 kw and 1,4 l, 50 kw see) or 6 (fig. of the Detail of system of greasing of the engine of 1,4 l, 55 and 74 kw see) маслоналивной mouths.
4. Remove грязезащитный an engine guard.
5. Turn away a stopper 15 (fig. of the Detail of system of greasing of the engine of 1,0 l, 37 kw and 1,4 l, 50 kw see) or 29 (fig. of the Detail of system of greasing of the engine of 1,4 l, 55 and 74 kw see) drain aperture on картере the engine, preliminary having substituted under it capacity, and merge the fulfilled oil.
6. Screw a stopper, having replaced new a sealing ring 16 (fig. of the Detail of system of greasing of the engine of 1,0 l, 37 kw and 1,4 l, 50 kw see) or 28 (fig. of the Detail of system of greasing of the engine of 1,4 l, 55 and 74 kw see).
7. Turn on a special key the oil filter 4 (fig. of the Detail of system of greasing of the engine of 1,0 l, 37 kw and 1,4 l, 50 kw see) or 12 (fig. of the Detail of system of greasing of the engine of 1,4 l, 55 and 74 kw see).
8. Grease a sealing ring of the new filter with engine oil.
9. Wrap the new filter hands without the aid of the tool.
10. Fill in demanded quantity of new oil, supervising its level under the index.
11. Start up the engine and allow to it to work some minutes idling. Stop the engine, check up level of oil and if necessary add to norm.

The moments of an inhaling of a stopper маслосливного apertures, Нм

Steel oil картера
30
Aluminium oil картера
40

DIESEL ENGINES

Refuelling volume of system of greasing with the oil filter – 4,5 l.

Fill in in system the oils corresponding to norms:

 – The engine of 1,9 l, 74, kw – VW 505 0;
 – The engine of 1,9 l, 47, kw – VW 506 00.

PERFORMANCE ORDER
1. Establish the car on a horizontal equal platform.
2. Start up the engine and warm up it to working temperature. Stop the engine and wait some minutes while oil will not flow down in the pallet картера.
3. Remove a stopper маслоналивной mouths.
4. Remove грязезащитный an engine guard.
5. Turn away a stopper 18 (fig. of the Detail of system of greasing of the diesel engine see) drain aperture on картере the engine, preliminary having substituted under it capacity, and merge the fulfilled oil. Screw a new stopper.
6. Turn away a cover 1.
7. Take out filtering element 4.
8. Establish a new filtering element, having replaced a sealing ring 3.
9. Screw a new cover 1 with a new sealing ring 2. The moment of an inhaling of a cover of the oil filter – 25 Нм.
10. Fill in demanded quantity of new oil, supervising its level under the index.
11. Start up the engine and allow to it to work some minutes idling. Stop the engine, check up level of oil and if necessary add to norm.