Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
- 10. An electric equipment
10.1. Removal and installation of the block of safety locks
10.2. The storage battery
- 10.3. Ignition system
10.3.1. Safety precautions regulations
10.3.2. Removal and installation of the module of ignition
10.3.3. Check and replacement of spark plugs
10.3.4. Check of a feed circuit of the module of ignition
10.3.5. Check of resistance of a secondary chain of the module of ignition
10.3.6. The gauge of position of a cam-shaft of engines of 1,0 l, 37 kw and 1,4 l, 50 kw
10.3.7. The gauge of frequency of rotation коленвала engines of 1,0 l, 37 kw, 1,4 l, 50 kw
10.3.8. The gauge of position of a cam-shaft of engines of 1,4 l, 55 and 74 kw
10.4. Removal and installation of a combination of devices
# 10.5. A cleaner and a windscreen washer
# 10.6. A cleaner and a washer of glass of a door of a back
10.7. Replacement of lamps
10.8. Removal and headlight installation
10.9. Removal and installation of a back lantern
10.10. Replacement of an additional lantern of a signal of braking
10.11. Switches and switches
10.12. Removal and installation of sound signals
10.13. Removal and installation динамиков
10.14. Removal and aerial installation
# 11. A body
# 12. Electroschemes
|
ENGINES of 1,0 l, 37 kw And 1,4 l, 50 kw
On engines of 1,0 l, 37 kw apply candles NGK BKR 6 ETA-10, the backlash between which electrodes makes 0,9–1,1 mm.
On engines of 1,4 l, 50 kw apply candles Champion RC 89 PYC (a backlash between electrodes of 0,8-0,9 mm) or Brisk DR 15 TC (a backlash of 0,75-0,85 mm).
The moment of an inhaling of spark plugs – 20–30 Нм.
| PERFORMANCE ORDER |
| 1. Remove the ignition module. |
| 2. Turn out spark plugs. |
| 3. Clear candles. |
| 4. Examine a candle. If on an insulator there are cracks, the carving or electrodes is damaged, it is necessary to replace a candle. |
| 5. Check up round щупом backlashes between electrodes of candles. If necessary adjust a backlash. |
| 6. Screw candles upside-down. |
|
ENGINES of 1,4 l, 55 And 74 kw
On the given engines candles NGK BKUR 6 ET-10, a backlash between electrodes – 1 mm are applied.
The moment of an inhaling of spark plugs – 20–30 Нм.
| PERFORMANCE ORDER |
| 1. Disconnect a wire from the plug - the storage battery. |
| 2. Remove the top casing of the engine. |
| 3. Remove tips with high-voltage wires 1 (fig. of the Detail of system of ignition of engines of 1,4 l, 55 and 74 kw see) from candles of 13 ignitions. |
| 4. Remove the holder of 12 wires. |
| 5. Turn out spark plugs. |
| 6. Clear candles. |
| 7. Examine a candle. If on an insulator there are cracks, the carving or electrodes is damaged, it is necessary to replace a candle. |
| 8. Check up round щупом backlashes between electrodes of candles. The backlash should make 0,9–1,1 mm. If necessary adjust a backlash. |
| 9. Screw candles upside-down. |
|
|
|