Shkoda Fabija
# 1.1. The car description
- 2. The engine
2.1. Removal of the top casing of the engine
- 2.2. Installation of the piston of the first cylinder in position ВМТ of a step of compression
2.2.1. Petrol engines of 1,4 l, 55 and 74 kw
2.2.2. Diesel engines
2.3. Replacement of a belt of a drive of the generator
# 2.4. Replacement and adjustment of a tension of a belt of a drive of a camshaft
2.5. Replacement of a chain of a drive of a camshaft
2.6. Selection of a distributive gear wheel of a cranked shaft
2.7. Replacement of a lining of a head of the block of cylinders
2.8. Replacement of an epiploon of a camshaft
2.9. Replacement маслосъемных caps
2.10. Replacement of a forward epiploon of a cranked shaft
2.11. A back epiploon of a cranked shaft
# 2.12. Repair of a head of the block of cylinders
# 2.13. Engine repair
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes
|
Details of a drive of camshafts of engines of 1,4 l, 55 and 74 kw
1 – the top cover of belts of a drive of camshafts;
2 – a bolt of fastening of a tension roller;
3 – a tension roller of a belt of a drive of a final camshaft;
4 – a belt of a drive of a final camshaft;
5 – a bolt of fastening of a back cover;
6 – a back cover;
7 – a bolt;
8 – a bolt of fastening of an eye;
9 – an eye;
10 – a bolt of fastening of a directing roller;
11 – a directing roller;
12 – an arm;
13 – a bolt of fastening of an arm;
14 – a lining of the water pump;
15 – the water pump; |
16 – a tension roller of a belt of a drive of camshafts;
17 – a directing roller;
18 – a bolt of fastening of a directing roller;
19 – a pulley of a cranked shaft;
20 – a bolt of fastening of a tension roller;
21 – a belt of a drive of camshafts;
22 – a bolt of fastening of the bottom cover;
23 – a pulley of a drive of the generator;
24 – a bolt of fastening of a pulley of a cranked shaft;
25 – a belt of a drive of the generator;
26 – the bottom cover of belts of a drive of camshafts;
27 – a bolt of fastening of an arm;
28 – an arm of the right support of the power unit |
PERFORMANCE ORDER |
1. Remove the top casing (subsection 2.1 see). |
2. Having unfastened latches, remove the top cover of 1 belt of a drive of a camshaft. |
|
3. Turn a cranked shaft so that apertures in pulleys of camshafts have settled down opposite each other, as is shown in drawing. |
|
4. Check up coincidence of labels 1 on a pulley of a drive of the generator and 2 on the bottom cover of a belt. |
|
5. If the bottom cover of a belt is removed, check up coincidence of a label 1 on a forward cover of the block of cylinders with the cut off tooth 2 on a pulley of a cranked shaft. |
|
|
|