Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
- 2. The engine
   2.1. Removal of the top casing of the engine
   - 2.2. Installation of the piston of the first cylinder in position ВМТ of a step of compression
      2.2.1. Petrol engines of 1,4 l, 55 and 74 kw
      2.2.2. Diesel engines
   2.3. Replacement of a belt of a drive of the generator
   # 2.4. Replacement and adjustment of a tension of a belt of a drive of a camshaft
   2.5. Replacement of a chain of a drive of a camshaft
   2.6. Selection of a distributive gear wheel of a cranked shaft
   2.7. Replacement of a lining of a head of the block of cylinders
   2.8. Replacement of an epiploon of a camshaft
   2.9. Replacement маслосъемных caps
   2.10. Replacement of a forward epiploon of a cranked shaft
   2.11. A back epiploon of a cranked shaft
   # 2.12. Repair of a head of the block of cylinders
   # 2.13. Engine repair
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




2.2.2. Diesel engines
THE GENERAL DATA

.Installation ВМТ of the piston of the first cylinder of the diesel engine

C – an aperture of the block of cylinders;

1 – the label (arrow) on a back cover of a belt of a drive of a camshaft should coincide with a hollow between two ledges on a nave of a pulley of a camshaft;

2 – adaptation MR-301 should enter into apertures of a pulley and a block head;

3 – adaptation T10050 for installation in ВМТ a cranked shaft should enter into an aperture From the block of cylinders, thus labels on the adaptation and a pulley should coincide


The piston of the first cylinder establish in position ВМТ of a step of compression the same as the piston of the petrol engine (subsection 2.2.1 see).

Labels ВМТ of the diesel engine of 1,9 l, 74 kw TDI are shown in drawing.