Shkoda Fabija
# 1.1. The car description
- 2. The engine
2.1. Removal of the top casing of the engine
# 2.2. Installation of the piston of the first cylinder in position ВМТ of a step of compression
2.3. Replacement of a belt of a drive of the generator
# 2.4. Replacement and adjustment of a tension of a belt of a drive of a camshaft
2.5. Replacement of a chain of a drive of a camshaft
2.6. Selection of a distributive gear wheel of a cranked shaft
2.7. Replacement of a lining of a head of the block of cylinders
2.8. Replacement of an epiploon of a camshaft
2.9. Replacement маслосъемных caps
2.10. Replacement of a forward epiploon of a cranked shaft
2.11. A back epiploon of a cranked shaft
# 2.12. Repair of a head of the block of cylinders
# 2.13. Engine repair
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes
|
The block of cylinders of engines of 1,0 l, 37 kw and 1,4 l, 50 kw
1 – a bolt of fastening of the case;
2 – the case of covers of radical bearings of the engine of 1,4 l;
3 – a persistent half ring of a cranked shaft of the engine
1,4 l;
4 – a bolt of fastening of the holder of a back epiploon;
5 – a flywheel;
6 – a bolt of fastening of a flywheel;
7 – a back epiploon of a cranked shaft;
8 – the holder of a back epiploon;
9 – a filter;
10 – a bolt of fastening of the screen;
11 – a bolt of fastening of the gauge;
12 – the detonation gauge;
13 – the block of cylinders;
14 – a bolt of fastening of an arm маслоприемника;
15 – a cover of distributive gear wheels;
16 – a forward epiploon of a cranked shaft;
17 – a pulley of a drive of the generator; |
18 – a bolt of fastening of a pulley of a cranked shaft;
19 – a bolt of fastening of a cover;
20 – a cover lining;
21 – a camshaft gear wheel;
22 – a gear wheel of a drive of the oil pump;
23 – a bolt of fastening of gear wheels;
24 – a chain of a drive of a camshaft;
25 – the top loose leaves of radical bearings;
26 – a gear wheel of a cranked shaft;
27 – шпонка;
28 – a cranked shaft of the engine of 1,4 l;
29 – the bottom loose leaf of the radical bearing;
30 – covers of radical bearings of the engine of 1,0 l;
31 – a persistent half ring of a cranked shaft of the engine of 1,0 l;
32 – a cranked shaft of the engine of 1,0 l |
The camshaft of petrol engines in volume of 1,0 l, capacity of 37 kw and 1,4 l, of 50 kw is resulted by capacity in rotation by a chain.
The prevention The chain needs to be changed complete with gear wheels of cranked and distributive shaft.
If a chain remove not for replacement, it is necessary to mark a direction of its rotation as at change of a direction of rotation the chain will quickly wear out.
PERFORMANCE ORDER |
1. Remove a belt of a drive of the generator (subsection 2.3 see). |
2. Keeping a cranked shaft from проворачивания, turn away a bolt 18 and remove a pulley 17 drives of the generator. |
3. Remove oil картер the engine (subsection 3.1 see). |
4. Turn away a bolt of 14 fastenings of an arm of the receiver of the oil pump. |
5. Turn away bolts of 19 fastenings of a cover of 15 distributive gear wheels and remove it with a lining of 20 covers.
The prevention It is necessary to replace a lining of a cover of distributive gear wheels with the new.
|
6. Turn away a bolt of 23 fastenings and remove a gear wheel 22 drives of the oil pump. |
7. Remove gear wheels 21 and 26 together with a chain. |
8. Pick up a gear wheel of a cranked shaft (subsection 2.6 see). |
|
9. Put on a chain gear wheels so that between labels on them 12 axes of links of a chain, as is shown in drawing have settled down. In such position establish gear wheels on cranked and distributive shaft. Establish a gear wheel of a drive of the oil pump. Screw a bolt of fastening of gear wheels, preliminary having put on a carving of a bolt hermetic Loctite 648 (1 – a chain of a drive of a camshaft; 2 – a camshaft gear wheel; 3 – a gear wheel of a cranked shaft; And – a label on a camshaft gear wheel; – a label on a gear wheel of a cranked shaft). |
10. Establish all removed details upside-down. Before вворачиванием bolts of fastening of a cover of distributive gear wheels put on their carving hermetic Loctite 242. |
|
|
|