Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
- 4. The power supply system
   4.1. Removal and installation of the air filter
   4.2. Replacement of a filtering element of the air filter
   4.3. Replacement of the gauge of the index of level of fuel
   4.4. Removal and installation of a fuel tank
   4.5. Check of the air valve
   4.6. Check of the gravitational valve
   4.7. Replacement of the fuel filter
   4.8. Check of the valve of heating of fuel
   4.9. Replacement of an adsorber of system of catching of steams of fuel
   4.10. Replacement of a fuel radiator
   4.11. Removal and installation of the vacuum pump of the diesel engine
   4.12. Removal and installation of an inlet pipe of the engine
   4.13. Removal and installation of a pedal of an accelerator
   - 4.14. Removal and installation of atomizers
      4.14.1. Petrol engines of 1,0 l, 37 kw and 1,4л, 50 kw
      4.14.2. Petrol engines of 1,4 l, 55 and 74 kw
      4.14.3. The diesel engine of 1,9 l, 47 kw
      4.14.4. The diesel engine of 1,9 l, 74 kw
   4.15. Check of a feed circuit of atomizers of the petrol engine
   4.16. Check of resistance of a pump-atomizer
   4.17. Check of candles накаливания the diesel engine of 1,9 l, 47 kw
   4.18. Check of a feed circuit of candles накаливания
   4.19. Check of the gauge of temperature of a cooling liquid
   4.20. Check of the gauge of temperature of air arriving in the engine
   4.21. Check of the gauge of temperature of fuel of the diesel engine of 1,9 l, 74 kw
   4.22. Check of the gauge of frequency of rotation of a cranked shaft
   4.23. Check of a drive throttle заслонки
   4.24. Check of the gauge of position of a camshaft
   4.25. Check элекромагнитного the valve рециркуляции the fulfilled gases
   4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kw
   4.27. Check of the electromagnetic valve of a purge of an adsorber
   4.28. Removal and installation турбокомпрессора
   4.29. Removal and installation of an intermediate cooler of air
   4.30. Check of the valve of pressure of pressurisation
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




4.14.2. Petrol engines of 1,4 l, 55 and 74 kw
THE GENERAL DATA

Details of system of injection of fuel of petrol engines of 1,4 l, 55 and 74 kw

1 – a stopper маслоналивной mouths;
2 – the top casing of the engine with the air filter;
3 – the holder of wires;
4 – a bolt of fastening of a fuel stage;
5 – the union for pressure measurement in system;
6 – a fuel stage with atomizers;
7 – a bolt of fastening of an inlet pipe of the engine;
8 – a vacuum hose of the amplifier of brakes;
9 – connecting колодка a drive throttle заслонки;
10 – a hose of a purge of an adsorber;
11 – an inlet pipe;
12 – a lining;
13 – a bolt of fastening of a tube рециркуляции the fulfilled gases;
14 – a tube рециркуляции the fulfilled gases;
15 – the second ljamda-probe (for the engines answering to norms of Euro-4);

16 – connecting колодка the second ljambda-probe;
17 – a ljambda-probe;
18 – connecting колодка a ljambda-probe;
19 – the gauge of frequency of rotation of a cranked shaft;
20 – a bolt of fastening of the gauge;
21 – a lining of an inlet pipe;
22 – the spring holder;
23 – connecting колодка;
24 – the gauge of temperature of a cooling liquid;
25 – заглушка;
26 – sealing rings;
27 – a bolt of fastening of the case of the thermostat;
28 – the thermostat case;
29 – топливопровод;
30 – connecting колодки the management block;
31 – the engine management block;
32 – a block arm;
33 – bolts of fastening of an arm

Fuel stage with atomizers of engines of 1,4 l, 55 and 74 kw

1 – топливопровод;

2 – the screw of fastening of a fuel stage;

3 – a fuel stage;

4 – the union for pressure measurement in system;

5 – an atomizer clamp;

6 – a sealing ring;

7 – an atomizer

PERFORMANCE ORDER
1. Disconnect a wire from the plug - the storage battery.
2. Remove the top casing of the engine (subsection 2.1 see).
3. Disconnect from atomizers колодки with wires.
4. Disconnect from a fuel stage 3 (fig. the Fuel stage with atomizers of engines of 1,4 l, 55 and 74 kw see) топливопровод 1.
5. Turn away two screws of 2 fastenings of a fuel stage.
6. Having pulled a fuel stage along axes of atomizers, remove it. Thus atomizers should leave apertures in an inlet pipe of the engine and remain on a stage. If any atomizer remained in an inlet pipe, it is necessary to replace its sealing rings 6 and a clamp 5.
7. Remove clamps of 5 atomizers.
8. Having pulled, take out atomizers 7 of a fuel stage 3.
9. Replace clamps of 5 atomizers if will find out on them cracks.
10. Replace the sealing rings of 6 atomizers torn, cracked or lost elasticity.
11. Establish atomizers upside-down. Thus grease with gasoline sealing rings of atomizers.