Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
- 7. Transmission and a running gear
   - 7.1. A transmission
      7.1.1. Technical characteristics of transmissions (КП)
      - 7.1.2. Type 002 transmission
         7.1.2.1. Removal and installation
         7.1.2.2. Check of level and oil pouring in a transmission
         7.1.2.3. Refuelling of a new box
         7.1.2.4. Replacement of a cover of the lever of a gear change
         7.1.2.5. Removal and installation of a drive of a gear change
         7.1.2.6. Dismantling and assemblage of the mechanism of a gear change
         7.1.2.7. Check of correctness of adjustment of a drive of a gear change
         7.1.2.8. Adjustment of a drive of a gear change
      # 7.1.3. A type transmission 02T
   # 7.2. A forward suspension bracket
   # 7.3. A back suspension bracket
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




7.1.2.4. Replacement of a cover of the lever of a gear change
THE GENERAL DATA

Details of fastening of a cover of the lever of a gear change

1 – the handle;

2 – a cover;

3 – a clamp;

4 – a collar;

5 – facing of the floor console

Extraction of a cover of the lever of a gear change from a framework


Removal of a cover from the handle

1 – a cover;

2 – a clamp;

3 – the handle;

4 – a cover framework

PERFORMANCE ORDER
1. Accurately having hooked a screw-driver in the places specified by arrows on (fig. Extraction of a cover of the lever of a gear change from a framework see), deduce from gearing a framework 4 (fig. Removal of a cover from the handle see) cover from gearing with facing 5 (fig. of the Detail of fastening of a cover of the lever of a gear change see) floor console.
2. Turn out a cover 2 inside out.
3. Unclench a collar of 4 fastenings of the handle to the gear change lever.
4. Remove the handle 1 with a cover 2 from the lever.
5. Having unclenched by means of a screw-driver a clamp 2 (fig. Removal of a cover from the handle see), remove it from the handle 3.
6. Turn the handle 3 and remove from it a cover 1.
7. Establish a cover upside-down, reliably having fixed it on the handle by means of a clamp.