Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
- 4. The power supply system
   4.1. Removal and installation of the air filter
   4.2. Replacement of a filtering element of the air filter
   4.3. Replacement of the gauge of the index of level of fuel
   4.4. Removal and installation of a fuel tank
   4.5. Check of the air valve
   4.6. Check of the gravitational valve
   4.7. Replacement of the fuel filter
   4.8. Check of the valve of heating of fuel
   4.9. Replacement of an adsorber of system of catching of steams of fuel
   4.10. Replacement of a fuel radiator
   4.11. Removal and installation of the vacuum pump of the diesel engine
   4.12. Removal and installation of an inlet pipe of the engine
   4.13. Removal and installation of a pedal of an accelerator
   - 4.14. Removal and installation of atomizers
      4.14.1. Petrol engines of 1,0 l, 37 kw and 1,4л, 50 kw
      4.14.2. Petrol engines of 1,4 l, 55 and 74 kw
      4.14.3. The diesel engine of 1,9 l, 47 kw
      4.14.4. The diesel engine of 1,9 l, 74 kw
   4.15. Check of a feed circuit of atomizers of the petrol engine
   4.16. Check of resistance of a pump-atomizer
   4.17. Check of candles накаливания the diesel engine of 1,9 l, 47 kw
   4.18. Check of a feed circuit of candles накаливания
   4.19. Check of the gauge of temperature of a cooling liquid
   4.20. Check of the gauge of temperature of air arriving in the engine
   4.21. Check of the gauge of temperature of fuel of the diesel engine of 1,9 l, 74 kw
   4.22. Check of the gauge of frequency of rotation of a cranked shaft
   4.23. Check of a drive throttle заслонки
   4.24. Check of the gauge of position of a camshaft
   4.25. Check элекромагнитного the valve рециркуляции the fulfilled gases
   4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kw
   4.27. Check of the electromagnetic valve of a purge of an adsorber
   4.28. Removal and installation турбокомпрессора
   4.29. Removal and installation of an intermediate cooler of air
   4.30. Check of the valve of pressure of pressurisation
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




4.14. Removal and installation of atomizers

4.14.1. Petrol engines of 1,0 l, 37 kw and 1,4л, 50 kw
THE GENERAL DATA

Details of system of injection of fuel of petrol engines of 1,0 l, 37 kw and 1,4л, 50 kw

1 – the engine management block;
2 – 40-contact connecting колодка;
3 – 81-contact connecting колодка;
4 – the air filter;
5 – an inlet branch pipe air
The filter;
6 – a hose of a supply of warm air;
7 – a screw collar;
8 – connecting колодка the gauge;
9 – the gauge of temperature of a cooling liquid;
10 – a ljambda-probe (the oxygen gauge);
11 – connecting колодка a ljambda-probe;
12 – connecting колодка the second ljambda-probe;
13 – the second ljambda-probe (for the engines answering to norms of Euro-4);
14 – an inlet pipe of the engine;
15 – a fuel stage;
16 – топливопровод;
17 – an inlet branch pipe;
18 – a bolt of fastening of a branch pipe;
19 – a hose of the air filter;
20 – spring collars

Fuel stage with atomizers of engines of 1,0 l, 37 kw and 1,4 l, 50 kw

1 – a fuel stage;
2 – a sealing ring of an atomizer;
3 – an atomizer;
4 – an atomizer clamp;
5 – the holder of wires

PERFORMANCE ORDER
1. Disconnect a wire from the plug - the storage battery.
2. Remove the top casing of the engine (subsection 2.1 see).
3. Turn away bolts 18 and remove an inlet branch pipe 17 from an inlet pipe of the engine.
4. Remove the holder 5 (fig. the Fuel stage with atomizers of engines of 1,0 l, 37 kw and 1,4 l, 50 kw see) wires of atomizers, having disconnected колодки from atomizers and from a plait of wires.
5. Disconnect топливопровод 16 (fig. of the Detail of system of injection of fuel of petrol engines of 1,0 l, 37 kw and 1,4л see, 50 kw) from a fuel stage 15.
6. Turn away bolts of fastening and, having pulled a fuel stage 1 (fig. the Fuel stage with atomizers of engines of 1,0 l, 37 kw and 1,4 l, 50 kw see) along axes of atomizers, remove it. Thus atomizers should leave apertures in an inlet pipe of the engine and remain on a stage. If any atomizer remained in an inlet pipe, it is necessary to replace its sealing rings 2 and a clamp 4.
7. Remove clamps of 4 atomizers.
8. Having pulled, take out atomizers 3 of a fuel stage 1.
9. Replace clamps of 4 atomizers if will find out on them cracks.
10. Replace the sealing rings of 2 atomizers torn, cracked or lost elasticity.
11. Establish atomizers upside-down, having greased with gasoline their sealing rings.