| 1. On cars with ABS disconnect a wire from the plug - the storage battery, disconnect колодку with wires from the gauge 20 (fig. of the Detail of a back suspension bracket with disk brakes see) frequencies of rotation of a wheel, turn away a bolt of 21 fastenings and remove the gauge 20. |
| 2. Remove a wheel nave (subsection 7.3.2 see). |
| 3. Turn away four bolts of 8 fastenings and remove a brake board 9 with a pin 15. |
| 4. Take out a pin 15 of a brake board 9. |
| 5. Establish a pin upside-down, having replaced 8 fastenings of a pin new bolts with a brake board. |