Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
- 11. A body
   11.1. Removal and installation of a skeleton of a motor compartment
   # 11.2. A forward door
   # 11.3. A back door
   # 11.4. Seats
   - 11.5. Seat belts
      11.5.1. Replacement of forward seat belts
      11.5.2. Replacement of a back seat belt
   11.6. Removal and installation of the panel of devices
   11.7. Removal and tjagovo-drawbar installation
   # 11.8. A heater
# 12. Electroschemes




11.5.1. Replacement of forward seat belts
THE GENERAL DATA

Fastening of a forward seat belt

1 – the adjustment mechanism on height;
2 – a bolt of fastening of the mechanism;
3 – the top upholstery of an average rack
Bodies;
4 – the top loop of a belt;
5 – a bolt of the top fastening of a belt;
6 – facing;
7 – a directing loop;
8 – the screw of fastening of a directing loop;
9 – the belt lock;
10 – the bottom upholstery of an average rack;
11 – a bolt of fastening of the coil of a belt;
12 – a bolt of the bottom fastening of a belt;
13 – the bottom loop of a belt;
14 – the coil with the device of a preliminary tension of a belt

PERFORMANCE ORDER
1. Remove an overlay of a threshold of a body.
2. Remove the bottom upholstery 10 (fig. Fastening of a forward seat belt see) average rack of a body.
3. Turn away two screws of 8 fastenings and remove directing loop 7 belts.
4. Having hooked from below a screw-driver, remove upwards facing 6 top fastenings of a seat belt.
5. Turn away a bolt 5 top fastenings.
6. Turn away a bolt 12 bottom fastenings of a belt.
7. Turn away a bolt of 11 fastenings of the coil 14 belts and remove a seat belt.
8. For replacement of the mechanism of adjustment on height remove the top upholstery 3 average racks of a body, turn away a bolt of 2 fastenings and remove the mechanism 1.
9. For replacement of the lock of a belt remove lateral facing of a seat, turn away a bolt of fastening and remove the lock 9.
10. Establish a belt upside-down.