Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
- 11. A body
   11.1. Removal and installation of a skeleton of a motor compartment
   # 11.2. A forward door
   # 11.3. A back door
   # 11.4. Seats
   # 11.5. Seat belts
   11.6. Removal and installation of the panel of devices
   11.7. Removal and tjagovo-drawbar installation
   - 11.8. A heater
      11.8.1. Removal and installation of the central snuffled on the panel of devices
      11.8.2. Removal and installation of a lateral nozzle on the panel of devices
      11.8.3. Removal and lattice installation обдува lateral glass
      11.8.4. Replacement of a filtering element of a heater
      11.8.5. Replacement of the additional resistor
      11.8.6. Removal and installation of the fan of a heater
      11.8.7. Removal and installation of the control panel by a heater
      11.8.8. Replacement of cables of a drive of a heater
      11.8.9. Removal and installation of a radiator of a heater
      11.8.10. Removal and heater installation
# 12. Electroschemes


http://lemon62.ru/pskov/cat_1250.html


11.8.10. Removal and heater installation
THE GENERAL DATA

Removal of the right support of an arm of the panel of devices

1 – the right support;

2, 4 – bolts;

3 – an adapter of the bottom air line

Air line fastening обдува feet of the driver

1 – a bolt of fastening of an air line;

2 – an air line обдува feet of the driver;

3 – the block of management of system "Comfort";

4 – a bolt

Heater fastening on the right side

1 – an arm of the panel of devices;

2 – a bolt;

3 – connecting колодка the additional resistor

PERFORMANCE ORDER
1. Disconnect a wire from the plug - the storage battery.
2. Merge a liquid from system of cooling of the engine or press taking away 1 and bringing 2 (fig. Connection of hoses to a heater radiator see) hoses of a radiator of a heater (if a heater radiator remove for replacement, it is necessary to merge a liquid).
3. From outside a motor compartment mark position of a branch pipe 4 radiators of a heater and turn away a bolt of 5 its fastenings. Take out a branch pipe and together with hoses put aside.
4. Muffle apertures in a heater radiator.
5. Remove the floor console.
6. Remove the panel of devices (subsection 11.6 see).
7. Remove an air line 24 (fig. heater Elements see) обдува a windscreen.
8. Remove воздуходув 6 central snuffled.
9. Disconnect a plait of wires from a support 1 (fig. Removal of the right support of an arm of the panel of devices see) arm of the panel of devices and "a mass" wire.
10. Turn away two top 4 and one bottom 2 bolt of fastening and remove the right support of 1 arm of the panel of devices.
11. Remove an adapter 3 bottom air lines.
12. Disconnect колодку 4 (fig. Removal of the fan of a heater see) with wires from the heater fan.
13. Remove the control panel a heater, having disconnected from it колодку with wires and drive cables (subsection 11.8.7 see).
14. Turn away a bolt 1 (fig. air line Fastening обдува feet of the driver) fastenings see and remove an air line 2 обдува feet of the driver.
15. Shift upwards an arm of fastening and remove it with the block of 3 managements of system "Comfort" (if it is established) from a heater casing.
16. On models with an electroheating element 2 (fig. a heater Radiator see) disconnect колодку 11 with wires from a plait on the left side of a heater and "a mass" wire 10.
17. Turn away three bolts 4 (fig. air line Fastening обдува feet of the driver see) heater fastenings on the left side.
18. Disconnect колодку 3 (fig. heater Fastening on the right side see) from the additional resistor of a heater.
19. Turn away two bolts of 2 fastenings of a heater on the right side.
20. Remove a heater from the car.
21. Establish a heater upside-down. Before installation of the panel of devices check up correctness of work of a heater. Establish branch pipes according to earlier made marks, densely having inserted them into a sealant on a board передка.
22. Check up level and if necessary add cooling liquid (at replacement of a radiator of a heater fill in a new liquid in system of cooling of the engine).

The inhaling moments, Нм

Bolt of fastening of a branch pipe of a radiator of a heater
20
Bolts of the top fastening of a support of an arm of the panel of devices
12
Bolt of the bottom fastening of a support of an arm of the panel of devices
25