Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
- 6. System of release of the fulfilled gases
6.1. Check of tightness of system of release of the fulfilled gases
6.2. Removal and installation of a reception pipe of the muffler (petrol engines)
6.3. Removal and installation of a reception pipe of the muffler (diesel engines)
6.4. Replacement of knots of the muffler in gathering (the resonator or the muffler)
6.5. System рециркуляции the fulfilled gases (engines of 1,4 l, 55 and 74 kw)
6.6. System рециркуляции the fulfilled gases (engines of 1,9 l, 74 kw)
6.7. System рециркуляции the fulfilled gases (engines of 1,9 l, 47 kw)
# 7. Transmission and a running gear
# 8. A steering
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes
|
System details рециркуляции the diesel engine of 1,9 l, 74 kw
1 – an inlet pipe;
2 – a sealing ring;
3 – the case throttle заслонки;
4 – the system valve рециркуляции;
5 – a bolt of fastening of the case throttle заслонки; |
6 – a branch pipe of the case throttle заслонки;
7 – a lining;
8 – a bolt of fastening of a connecting pipe;
9 – a final collector;
10 – a nut of fastening of a connecting pipe;
11 – a connecting pipe |
Valve check рециркуляции the diesel engine of 1,9 l, 74 kw
|
1 – the valve рециркуляции;
2 – the case throttle заслонки;
3 – throttle заслонка;
4 – a valve rod;
5 – the vacuum pump |
Valve check
Removal and installation of elements of system рециркуляции
The valve рециркуляции the fulfilled gases, established on the case throttle заслонки, represents with it not folding design. It is possible to replace the valve only together with the case throttle заслонки.
PERFORMANCE ORDER |
1. Remove the top casing of the engine (subsection 2.1 see). |
2. Disconnect a vacuum hose from the union of the valve 4 (fig. of the Detail of system рециркуляции the diesel engine of 1,9 l, 74 kw see) systems рециркуляции. |
3. Ослабьте an inhaling of a collar also disconnect an air line from the case 3 throttle заслонки. |
4. Turn away two bolts of 8 fastenings of a connecting pipe 11 to the case 3 throttle заслонки. |
5. Turn away three bolts of 5 fastenings and remove the case 3 throttle заслонки with the valve 4. |
6. For removal of a connecting pipe 11 turn on two nuts of 10 its fastenings to a final collector. |
7. Replace linings 7 and a sealing ring 2 irrespective of their condition. |
8. Establish system elements рециркуляции the fulfilled gases upside-down. Nuts of 10 fastenings of a connecting pipe to a final collector replace new. Grease hairpins of a final collector with graphite greasing. |
|
The inhaling moments, Нм
Bolts of fastening of the valve |
10
|
Bolts of fastening of a connecting pipe to the valve |
25
|
Nuts of fastening of a connecting pipe to a final collector |
25
|
|
|