Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
- 8. A steering
   8.1. Removal and steering wheel installation
   8.2. Removal and installation of returnable and contact rings in gathering
   # 8.3. A steering column
   - 8.4. The steering mechanism (without the amplifier)
      8.4.1. Replacement of a tip of steering draught
      8.4.2. Removal of the steering mechanism
      8.4.3. Installation of the steering mechanism
      8.4.4. Check and position adjustment рейки the steering mechanism
      8.4.5. Check and backlash adjustment between a gear wheel and рейкой
      8.4.6. Replacement of steering draught
   # 8.5. The steering mechanism (with the amplifier)
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




8.4.3. Installation of the steering mechanism
THE GENERAL DATA

Details of the steering mechanism (a steering without the amplifier)

1 – a tip;
2 – a counternut;
3 – an external collar;
4 – a protective cover;
5 – an internal collar;
6 – steering draught;
7 – a pillow;
8 – fixing скоба;
9 – a sealant;
10 – картер the steering mechanism;
11 – a shaft приводной gear wheels of the steering mechanism;
12 – рейка the steering mechanism

PERFORMANCE ORDER
1. Check up and, if necessary, adjust position рейки the steering mechanism (subsection 8.4.4 see).
2. Grease with a soap solution a pillow 7 (fig. of the Detail of the steering mechanism (a steering without the amplifier see)) support of the steering mechanism to facilitate installation on it fixing скобы 8.
3. Establish the steering mechanism 12 (Fastening of the steering mechanism fig. see the car (without the amplifier)) on a beam 11 forward suspension brackets and screw new bolts of 7 its fastenings, definitively without tightening them.
4. Check up correctness of installation of a sealant 9 (fig. of the Detail of the steering mechanism (a steering without the amplifier see)) on the case of the steering mechanism.
5. Cautiously lift a beam and fix it, having entered thus into a board aperture передка a shaft приводной gear wheels of the steering mechanism.
6. Tighten the corresponding moment bolts of fastening of the steering mechanism to a beam of a forward suspension bracket the corresponding moment.
7. Connect steering bent for to rotary levers.
8. Attach a back support 10 (Fastening of the steering mechanism fig. see the car (without the amplifier)) the power unit to a transmission two new bolts 9.
9. On models with the reception pipe of the muffler which are passing under a beam of a forward suspension bracket, establish a reception pipe with neutralizer.
10. Establish грязезащитный a guard and forward wheels.
11. Lower the car on wheels.
12. Put on a plug 1 карданного the hinge a shaft приводной gear wheels of the steering mechanism and fix a plug a new coupling bolt 2.
13. Insert into a board aperture передка a sealant 9 (fig. of the Detail of the steering mechanism (a steering without the amplifier see)). Be convinced that it has settled down exactly and densely.
14. Establish a casing 2 (fig. casing Fastening карданного a shaft of a steering column) карданного a shaft of a steering column see and fix its two plastic nuts 1.
15. Check up and, if necessary, adjust corners of installation of wheels.

The inhaling moments, Нм

Bolts of fastening of the steering mechanism to a beam of a forward suspension bracket
50, then to tighten on 90
Bolts of fastening of a back support to a transmission
30, then to tighten on 90
Coupling bolt of a plug карданного the hinge
20, then to tighten on 90
Bolts of fastening of a wheel
120