Skoda Fabia

Since 2000 of release



Shkoda Fabija
# 1.1. The car description
# 2. The engine
# 3. Greasing system
# 4. The power supply system
# 5. Cooling system
# 6. System of release of the fulfilled gases
# 7. Transmission and a running gear
- 8. A steering
   8.1. Removal and steering wheel installation
   8.2. Removal and installation of returnable and contact rings in gathering
   # 8.3. A steering column
   - 8.4. The steering mechanism (without the amplifier)
      8.4.1. Replacement of a tip of steering draught
      8.4.2. Removal of the steering mechanism
      8.4.3. Installation of the steering mechanism
      8.4.4. Check and position adjustment рейки the steering mechanism
      8.4.5. Check and backlash adjustment between a gear wheel and рейкой
      8.4.6. Replacement of steering draught
   # 8.5. The steering mechanism (with the amplifier)
# 9. Brake system
# 10. An electric equipment
# 11. A body
# 12. Electroschemes




8.4.4. Check and position adjustment рейки the steering mechanism
THE GENERAL DATA

Position adjustment рейки the steering mechanism

1 – картер the steering mechanism;

2 – рейка;

3 – колпачковая a nut;

4 – steering draught;

And = 68,5 mm (a steering without the amplifier);

And = 72,5 mm (a steering with the amplifier)

Before installation of the steering mechanism on the car рейка should be on the average position. At the steering mechanism delivered in spare parts, рейка долна to be on the average position.

PERFORMANCE ORDER
1. Measure a calliper distance and, specified in fig. position Adjustment рейки the steering mechanism. It should be identical from both parties of the steering mechanism. For a steering without the amplifier the distance and should make 68,5 mm, with the amplifier – 72,5 mm. Otherwise position рейки is necessary for adjusting.
2. Adjust position рейки, turning a shaft 11 (fig. of the Detail of the steering mechanism (a steering without the amplifier see)) приводной gear wheels of the steering mechanism in the corresponding party.